Complete 20-block icemaker with Stainless Steel or Polyethylene Plastic ice cans and six 5-gallon pails of propylene glycol. Machine weight -400 lbs, with Glycol - 665lbs. The BM-2000 requires both a 110 volt outlet to power the agitator motor, and a 220 volt outlet to operate the condensing unit.

This unit produces 20 -12.5 pound blocks of ice in approximately 12-14 hours or 250 lbs. This may vary depending on the ambient air temperature and water temperature. Manufacturer's warranty is 1 year on parts and 5 years on the compressor with a 90 day compressor labor allowance. This item must be shipped by truck line.

Specifications
Unit Weight:	400 LBS
Propylene Glycol/Weight:	30 GLS, 270 LBS
No. of Blocks Makes:	20
Time to Freeze Blocks:	APP. 14 HRS
Electrical Current:	220 V / 60HZ
Electrical Outlets Required:	One 110V & One 220V
Amps/Condensing Unit :	10.5
Amps/Agitator Motor:	5.1
Electrical Breaker :	20 Amp
Horsepower:	3/4
Refrigerant:	404-A
Cost Per Block (App.):	.12 to .17
Lbs. of Ice Per Day:	500 Lbs
$6,679.07 - BM-2000SS $5,976.29 - BM-2000PL

CLICK HERE FOR BLOCKMASTER SPECIFICATION SHEET

Complete 40 block High Capacity icemaker with Stainless Steel or Polyethylene Plastic ice cans and eight 5GL pails of Propylene Glycol. Machine weight 300 lbs, with Glycol 760 lbs. The BM-4200 requires both a 110 volt outlet to power the agitator motor, and a 220 volt outlet to operate the condensing unit.

This unit produces 40 - 12.5 pound blocks of ice (e.g. 500 lbs) in approximately 8 hours. This may vary depending on the ambient air temperature and water temperature. Manufacturers warranty is 1 year on parts and 5 years on the compressor with a 90 day compressor labor allowance.

Specifications
Unit Weight:	510 LBS
Propylene Glycol/Weight:	40 GLS, 350 LBS
No. of Blocks Makes:	40
Time to Freeze Blocks:	APP. 12 HRS
Electrical Current:	220V / 60HZ
Electrical Outlets Required:	One 110V & One 220V
Amps/Condensing Unit :	14.8
Amps/Agitator Motor:	5.1
Electrical Breaker :	20 Amp
Horsepower:	2 1/2
Refrigerant:	404-A
Cost Per Block (App.):	.12 to .17
Lbs. of Ice Per Day:	1200 LBS
$9,198.10 - BM-4200SS $8,857.08 - BM-4200PL

CLICK HERE FOR BLOCKMASTER SPECIFICATION SHEET

These bags are used for block ice made from the SnoMaster or SnoBlock icemaker.

$43.40

Used as the coolant medium in our block icemakers. Propylene Glycol is poured into the cabinet of the icemaker, along with water, at a rate of 2 parts glycol to 3 parts water. This mixture is for the initial start up of the icemaker. When the glycol/water solution becomes low or diluted, additional glycol needs to be added.

Before adding additional glycol, the existing glycol/water solution should be tested to determine the amount of glycol needed. Customers can test their solution by using our Glycol Tester, Item GLYCOLTDC70, or by sending in a small sample of their solution.

$52.65 (2 ½ gallon pail)
$92.78 (5 gallon pail)

The SnoWizard BM 404-08 Spinner Block^® icemaker comes complete with eight polyethylene plastic round ice molds and four 5-gallon pails of propylene glycol. This unit produces eight round ice cylinders every 8 hours or 24 cylinders a day at 80°F air and 80° F water temperature. Each round ice cylinder is 7" in diameter and 6" in height weighing 8 pounds and is made to fit the Hatsuyuki^® and Swan^® shavers. Make your own ice for approximately 10¢ per block, including 5¢ for the ice bag.

Manufacturer's warranty is 1 year on parts and 5 years on the compressor with a 90 day compressor labor allowance. This item must be shipped by truck line.

Specifications
Unit Weight:	240 LBS
Propylene Glycol/Weight:	20 GLS, 200 LBS
No. of Blocks Makes:	8 - 8 LB BLOCKS
Time to Freeze Blocks:	APP. 8 HRS
Electrical Current:	110 V / 60 HZ
Electrical Outlets Required:	Two 110 V
Amps/Condensing Unit :	6.2
Amps/Agitator Motor:	5.1 amps
Electrical Breaker :	20 Amp
Horsepower:	1/2 HP
Refrigerant:	414-B
Cost Per Block (App.):	0.12 to 0.17
Lbs. of Ice Per Day:	192 LBS
$4,056.35

CLICK HERE FOR BM SPINNER-BLOCK SPECIFICATION SHEET

The SnoWizard BM 404-14 Spinner Block^® icemaker comes complete with fourteen polyethylene plastic round ice molds and seven 5-gallon pails of propylene glycol. This unit produces fourteen round ice cylinders every 8 hours or 42 cylinders a day at 80°F air and 80° F water temperature. Each round ice cylinder is 7" in diameter and 6" in height weighing 8 pounds and is made to fit the Hatsuyuki^® and Swan^® shavers. Make your own ice for approximately 10¢ per block, including 5¢ for the ice bag.

Manufacturer's warranty is 1 year on parts and 5 years on the compressor with a 90 day compressor labor allowance. This item must be shipped by truck line.

Specifications
Unit Weight:	350 LBS
Propylene Glycol/Weight:	35 GL, 336 LBS
No. of Blocks Makes:	14 - 8 LB BLOCKS
Time to Freeze Blocks:	APP. 8 HRS
Electrical Current:	220 V / 60 HZ
Electrical Outlets Required:	One 110V & One 220V
Amps/Condensing Unit :	9.2
Amps/Agitator Motor:	5.1 amps
Electrical Breaker :	20 Amp
Horsepower:	3/4 HP
Refrigerant:	404-A
Cost Per Block (App.):	0.12 to 0.17
Lbs. of Ice Per Day:	432 LBS
$5,395.18

CLICK HERE FOR BM SPINNER-BLOCK SPECIFICATION SHEET

The SnoWizard BM 404-19 Spinner Block^® icemaker comes complete with nineteen polyethylene plastic round ice molds and nine 5-gallon pails of propylene glycol. This unit produces nineteen round ice cylinders every 8 hours or 57 cylinders a day at 80°F air and 80° F water temperature. Each round ice cylinder is 7" in diameter and 6" in height weighing 8 pounds and is made to fit the Hatsuyuki^® and Swan^® shavers. Make your own ice for approximately 10¢ per block, including 5¢ for the ice bag.

Manufacturer's warranty is 1 year on parts and 5 years on the compressor with a 90 day compressor labor allowance. This item must be shipped by truck line.

Specifications
Unit Weight:	530 LBS
Propylene Glycol/Weight:	45 GLS, 432 LBS
No. of Blocks Makes:	19 - 8 LB BLOCKS
Time to Freeze Blocks:	APP. 8 HRS
Electrical Current:	220 V / 60 HZ
Electrical Outlets Required:	One 110V & One 220V
Amps/Condensing Unit :	18
Amps/Agitator Motor:	5.1 amps
Electrical Breaker :	20 Amp
Horsepower:	2 HP
Refrigerant:	404-A
Cost Per Block (App.):	0.12 to 0.17
Lbs. of Ice Per Day:	456 LBS
$7,018.11

CLICK HERE FOR BM SPINNER-BLOCK SPECIFICATION SHEET

The SnoWizard BM 404-19HC Spinner Block^® icemaker comes complete with nineteen polyethylene plastic round ice molds and nine 5-gallon pails of propylene glycol. This unit produces nineteen round ice cylinders every 4 hours or 114 cylinders a day at 80°F air and 80° F water temperature. Each round ice cylinder is 7" in diameter and 6" in height weighing 8 pounds and is made to fit the Hatsuyuki^® and Swan^® shavers. Make your own ice for approximately 10¢ per block, including 5¢ for the ice bag.

Manufacturer's warranty is 1 year on parts and 5 years on the compressor with a 90 day compressor labor allowance. This item must be shipped by truck line.

Specifications
Unit Weight:	750 LBS
Propylene Glycol/Weight:	45 GLS, 432 LBS
No. of Blocks Makes:	19 - 8 LB BLOCKS
Time to Freeze Blocks:	APP. 4 HRS
Electrical Current:	Two 20 Amp
Electrical Outlets Required:	One 110V & Two 220V
Amps/Condensing Unit :	18.0 / 18.0
Amps/Agitator Motor:	5.0
Electrical Breaker :	Two 20 Amp
Horsepower:	Two 2.5 HP
Refrigerant:	404-A
Cost Per Block (App.):	0.10
Lbs. of Ice Per Day:	912 LBS
$9,891.73

CLICK HERE FOR BM SPINNER-BLOCK SPECIFICATION SHEET